Initialising Sensor Learning (Models With Navi) - Mazda BT-50 Owner's Manual

3-8
SETTINGS

Initialising sensor learning (Models with NAVI)

If the GPS reception is lost, the navigation system of this unit determines the relative
position of the vehicle by Gyro sensor, Speed pulse and the reverse signal.
You can clear all the information collected by the sensors.
• Vehicle position learning conditions:
− GPS reception: Received
− Vehicle speed: 50 km/h or more
− Distance Time: Approx. 2 minutes
− Direction: Turn 90 degrees or more to the left and right.
• Initialise the sensor learning in the following cases:
− After unit is changed.
− After battery is replaced.
1.
On the System settings screen, touch
• This displays a message and resets the sensor learning settings.
NOTE
• After initialising the sensor learning, it needs some time to learn the sensor
information again and travel for the certain period of time.
Initialise Sensor Learning
.