Brother DCP-9040CN Network User's Manual page 19

Multi-protocol on-board ethernet multi-function print server

Hide thumbs Also See for DCP-9040CN:

Table of Contents

Double-click the unconfigured device.

Windows

Note

• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the

device will appear as Unconfigured in the BRAdmin Light utility screen.

• You can find the node name and Ethernet address by printing the Network Configuration List. See Printing

the Network Configuration List on page 25 for information on how to print the Network Configuration List

on your print server.

Choose STATIC from Boot Method. Enter the IP address, Subnet Mask and Gateway (if needed) of

your print server.

Windows

Click OK.

With the correctly programmed IP address, you will see the Brother print server in the device list.

Configuring your network printer

Macintosh

Table of Contents

Troubleshooting

Dcp-9042cdn Dcp-9045cdn Mfc-9440cn Mfc-9450cdn