Loading Envelopes And Other Media - Brother DCP-8060 User Manual

Loading envelopes and other
media
Use the MP tray when printing envelopes,
labels, and thick paper.
a
Open the MP tray and lower it gently.
b
Pull out the MP tray support.
c
Insert the media into the MP tray with
the top edge first and the printing side
face up. Make sure that the media is
staggered and stays under the
maximum paper mark (
of the tray.
d
While pressing the media-guide release
lever, slide the media guide to fit the
media size.
2
b ) on both sides
Loading documents and paper
Loading Envelopes
Before loading, press the corners and sides
of the envelopes to make them as flat as
possible.
CAUTION
Do not use the following types of
envelopes, as they will cause paper feed
problems:
1 Envelopes with a baggy construction.
2 Embossed envelopes (those with a
raised surface).
3 Envelopes with clasps or staples.
4 Envelopes that are pre-printed on the
inside.
Rounded
Glue
2
flap
2
2
Triangular
Double
flap
flap
2
2
13
2