Disconnect Device; Radio Interference; Important Safety Instructions - Brother DCP-8060 User Manual

WARNING
Use of controls, adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure.

Disconnect device

This product must be installed near an electrical socket that is easily accessible. In case of
emergency, you must disconnect the power cord from the electrical socket to shut off power
completely.

Radio interference

This product complies with EN55022 (CISPR Publication 22)/Class B. When connecting the
machine to a computer, ensure that you use the following interface cables.
1 A shielded parallel interface cable with twisted-pair conductors and that is marked IEEE 1284
compliant. The cable must not exceed 2.0 metres in length.
2 A USB cable which must not exceed 2.0 metres in length.

Important safety instructions

1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the product.
4 Unplug this product from the wall outlet before cleaning the outside of the machine and the
scanner glass. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
5 Do not place this product near water.
6 Do not place this product on an unstable cart, stand, or table. The product may drop, causing
serious damage to the product.
7 Slots and openings in the cabinet at the back or bottom are provided for ventilation; to ensure
reliable operation of the product and to protect it from overheating, these openings must not
be blocked or covered. The openings should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should never be placed near or over a radiator
or heater. This product should never be placed in a built-in installation unless adequate
ventilation is provided.
8 This product should be connected to an AC power source within the range indicated on the
rating label. Do NOT connect it to a DC power source. If you are not sure, contact a qualified
electrician.
9 This product is equipped with a 3-wire grounding type plug, a plug having three pins. This plug
will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not
defeat the purpose of the grounding-type plug.
Safety and Legal
A
A
A
37
A