Signode PSD-109 Operation, Parts And Safety Manual page 14

TROUBLESHOOTING, Continued
#5 SYMPTOM: Dispenser 'Jerk' starts.
CAUSE
The dancer arm is traveling too high before
the brake is released.
#6 SYMPTOM: Strap pulls out of machine.
CAUSE
The dancer arm is traveling too high before
the brake is released.
#7 SYMPTOM: Dancer arm hits bumper when actuated.
CAUSE
Broken dancer arm extension spring.
#8 SYMPTOM: Dancer arm swings upward with little or no resistance.
CAUSE
Check for broken external dancer arm
extension spring, chain or connecting link.
#9 SYMPTOM: Dancer arm motion is erratic.
CAUSE
Check for broken dancer arm compression
spring.
REMEDY
Adjust the brake cam to release the brake
sooner. See Adjustments Section.
REMEDY
Adjust the brake cam to release the brake
sooner. See Adjustments Section.
REMEDY
Replace dancer arm extension spring. See
Parts Removal and Replacement Section.
REMEDY
Replace broken parts as needed. See Parts
Removal and Replacement Section.
REMEDY
Replace broken parts as required. See Parts
Removal and Replacement Section.
14