Advertisement
Quick Links
ENGINEERED PRODUCTS TECHNICAL INFORMATION RELEASE
(POWER STRAPPING MACHINE DIVISION)
This Technical Information Release concerns a field repair program that involves the addition of a
guard and safety labelling onto the PSD 109 and 119 strapping dispensers.
DATE: May 1, 2015
PRODUCT: Models PSD-109 and PSD-119 Strapping Dispensers.
PSD-109
DOES NOT INCLUDE the PSD-119 J and SJ Jumbo Coil Dispensers.
MANUFACTURERS: Signode, Signode Canada, Acme Packaging, Fleetwood and Cyklop.
TECHNICAL ISSUE ADDRESSED
There is a possible crush point on both the PSD-109 and PSD-119 strapping dispensers where the
dancer arm comes into close proximity to the dispenser's "positive stop" area. A guard has been
designed to cover the possible crush point.
RECOMMENDED SOLUTION: Add Internal Warning Sign 611298, Dispenser Guard 611299 and
External Warning Sign 510486.
INTERNAL
WARNING SIGN
MOUNTED TO POST
Part Number:
611298
©2015 SIGNODE SPD 1824 07-29-15
TIR: 2015-409
PSD-119
DISPENSER GUARD
Part Number: 611299
Dispenser guard fits
both left hand & right
hand dispensers.
EXTERNAL
WARNING SIGN
MOUNTED ON GUARD
Part Number:
510486
Page 1
Advertisement
Related Manuals for Signode PSD-109
Summary of Contents for Signode PSD-109
- Page 1 MANUFACTURERS: Signode, Signode Canada, Acme Packaging, Fleetwood and Cyklop. TECHNICAL ISSUE ADDRESSED There is a possible crush point on both the PSD-109 and PSD-119 strapping dispensers where the dancer arm comes into close proximity to the dispenser’s “positive stop” area. A guard has been designed to cover the possible crush point.
- Page 2 (POWER STRAPPING MACHINE DIVISION) DISPENSER GUARD INSTALLATION (ESTIMATED INSTALLATION TIME - 15 MINUTES) PSD-109 & PSD-119 DISPENSERS: 1. Before installing the guard, follow your plant's lockout/tagout procedures for securing and isolating all power sources to the dispenser. 2. Attach internal warning sign as shown on guard side of post. Subsequently, the guard will cover sign.
- Page 3 (POWER STRAPPING MACHINE DIVISION) DISPENSER GUARD INSTALLATION (ESTIMATED INSTALLATION TIME - 15 MINUTES) PSD-109 & PSD-119 DISPENSERS (Continued): 5. Attach external warning sign as shown. 6. Confirm that equipment is "all clear" and then reconnect power in accordance with the plant's lockout/tagout procedures.
Need help?
Do you have a question about the PSD-109 and is the answer not in the manual?
Questions and answers