Brother DCP-8040 Quick Setup Manual page 28

N
Click Yes to have the Control Center loaded
each time Windows
Center will appear as an icon in the task
tray.
If you click No the Scan keys on the DCP
will be disabled.
■ If you checked the box in step
screen for On-Line Registration will
appear. Please complete your registration
before proceeding to step
■ Even if you select No, later you will be
able to launch the Brother Control Center
to use the Scan key by double clicking the
Smart UI icon on the desktop. This loads
the Brother Control Center to the task tray.
See AutoLoad the Brother Control Center,
Chapter 9 in the Dcumentation (User's
Guide) located on the CD-ROM.
A Basic Universal printer driver was
installed with the MFL-PRO Software
Suite which is certified for use with
®
Windows operating systems.
Brother also offers a full featured
printer driver (Native driver) that
includes more features than the Basic
Universal driver. However, this driver
does not include a Windows
certificate. To install the Brother Native
driver proceed to step
For details on what features are available
see chapter 7 of the User's Guide.
®
is started. The Control
J
, the
N
.
®
O
.
Brother Native driver Installation
O
Click Start and select Settings and then
Printers. Click on Add a printer and the
Add Printer Wizard will start.
When this screen appears, click Next.
P
Un-check the Automatically detect and
install my Plug and Play printer selection
and then click Next.
Q
Select BMFC (Brother MFL Port) from the
pull down window for the Printer Port
Selection and then click Next.
Continued ...
25