Setting Up The Machine; Install The Automatic Document Feed (Adf) Support; Install The Drum Unit Assembly - Brother DCP-8040 Quick Setup Manual

Step 1
Install the Automatic
1 Document Feed (ADF)
Support
Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
1
Open the ADF cover.
2
Insert the tabs of ADF support into the holes
of the ADF one side at a time.
Tab
3
Push ADF Support down until it latches in
place.
2

Setting Up the Machine

ADF Cover
Tab
Hole
ADF support
4
Close the ADF cover.
Install the Drum Unit
2
Assembly
1
Open the front cover by pressing the front
cover release button.
Front Cover
2
Unpack the drum unit assembly.
Remove the protective part.
Protective part
Front Cover
Release Button
Drum Unit
Assembly