ASSEMBLY AND INSTALLATION
BEFORE YOU GET STARTED
Spread cushioning flat to lay the TV on. This will help to prevent damage.
1. Stand assembly
a. Attach stands to base of TV, ensuring 'L' and 'R' markings on the TV
and stand match.
b. Insert three
(not supplied) to tighten.
1a
2. Remote control assembly
a. Open the battery compartment cover on the back side.
b. Insert batteries (x2 1.5V AAA size for the standard remote, x2 1.5V AA
size for the magic remote) making sure to match the polarity markings
(+ / -) of the batteries with the diagram inside the compartment.
c. Replace battery compartment cover.
2a
8
screws and use Phillips head screwdriver
M4 x 23mm
2b
• Standard = AAA
• Magic = AA
1b
2c