PAIRING THE MAGIC REMOTE
After the TV has been on for at least 20 seconds,
point the remote toward the TV and then long-press
the wheel. The remote control will automatically be
registered. A notification will confirm, and the pointer
will appear on screen.
If the Magic Remote's pointer does not appear on the
screen, you must re-register it. Point the remote control
towards the TV and long-press the
the notification appears.
INPUTS AND PORTS
1 USB 2.0 (x2; 5v 500mA)
2 Ethernet port (LAN)
3 Composite video (RCA)
4 Composite audio (RCA, left and right)
10
button until
guide
5 Headphone jack (3.5mm line out)
6 HDMI (x3; ARC support on HDMI 2)
7 Antenna
8 Digital audio (Optical out)
wheel
guide
button