Brother DCP-385C Quick Setup Manual page 2

®
Windows
For
Before you install
9
a.
Make sure that your computer is ON and you are logged on with Administrator rights.
Important
• DO NOT connect the USB cable yet.
• Close any applications.
• Make sure there are no memory cards or a USB Flash memory drive inserted.
• The screen may differ depending on the operating system.
• The supplied CD-ROM includes ScanSoft™ PaperPort™ 11SE.
• This software supports Windows ® 2000 (SP4 or greater), XP (SP2 or greater), XP
Professional x64 Edition and Windows Vista ® . Update to the latest Windows
Service Pack before installing MFL-Pro Suite.
, when the User Account Control screen appears, click Allow.
• For Windows Vista
®
b.
Click Install MFL-Pro Suite, and click Yes
if you accept the license agreements.
b. c.
Connect the USB cable to the USB Carefully route the USB cable through
socket marked with a the cable channel and out the back of
symbol. The USB socket the machine. Connect the cable to your
is inside the machine computer.
as shown.
Connect the power cord
12
a.
Connect the power Important
cord.
DO NOT cancel any
of the screens.
It may take a
few minutes for
installation to
complete.
The installation will continue automatically.
The installation screens appear one after another.
Install Optional Applications supported by Reallusion, Inc
14
FaceFilter Studio lets you edit your photo data
and add photo effects such as red eye reduction
or skin tone enhancement.
Important
• The computer must be connected to the
internet.
• The machine must be ON and connected to
the computer.
Install FaceFilter Studio Help
15
a.
Go to Start/ b.
Click the button on
All Programs/
the upper right corner
Reallusion/
of the screen, and
FaceFilter Studio
then click Check for
on your computer.
updates to go to the
Reallusion update web
page.
Install MFL-Pro Suite
10
b.
Unplug the machine.
®
Connect the USB cable
11
c.
Follow the on-screen instructions a.
Lift the scanner cover until it locks
until this screen appears:
securely into the open position.
Important
• DO NOT connect the
machine to a USB port on a
keyboard or a non-powered
USB hub. Connect the
machine directly to your
computer.
• Make sure that the cable
does not restrict the cover
from closing, or an error
may occur.
Finish and restart
13
b. a.
When the Click Finish to restart your
On-Line computer.
Registration
screen appears,
make your
selection and
follow the
on-screen
instructions.
a. b.
Open the main menu again by The CD-ROM main menu will appear.
ejecting and then reinserting the Choose your language and then click
CD-ROM or by double-clicking the Additional Applications.
start.exe program from the root
folder.
c. d.
Click the
Download button
and choose a
folder to save the
file in.
For
Before you install
9
a.
Insert the supplied CD-ROM into
your CD-ROM drive.
Choose your language.
Note
If the Brother screen does not
appear automatically, go to My
Computer (Computer), double-
click the CD-ROM icon, and then
double-click start.exe.
d.
Lift the scanner cover to release
the lock a. Gently push
1
the scanner cover
Install MFL-Pro Suite
support down b
11
3
and close the
2
scanner
cover c.
The installation is
Finish
now complete.
Note
If an error message appears
during the software installation,
run the Installation Diagnostics
located in Start/All Programs/
Brother/DCP-XXXX (where
DCP-XXXX is your model name).
c.
Click the FaceFilter Studio
button to install.
Note
You can also install
BookScan&Whiteboard
Suite from the main menu.
Install Presto!
12
Note
To view FaceFilter
Studio Help,
Close FaceFilter
go to Start/
Studio, double-click the
All Programs/
downloaded file from the
Reallusion/
folder you specified, and
FaceFilter Studio/
then follow the on-screen
FaceFilter Studio
instructions to install.
Help on your
computer.
®
Mac OS X
Connect the USB cable
10
Make sure your machine is connected to the
power and your Macintosh is ON. You must
®
be logged on with Administrator rights.
Important
• Make sure there are no memory cards
or a USB Flash memory drive inserted.
• For Mac OS X 10.2.0 to 10.2.3 users,
®
upgrade to Mac OS ® X 10.2.4 or greater.
(For the latest information for
Mac OS ® X, visit
http://solutions.brother.com/)
c.
Carefully route the USB cable through Important
the cable channel and out the back of
• DO NOT connect the machine
the machine.
to a USB port on a keyboard
d.
Connect the cable to your Macintosh ® .
or a non-powered USB hub.
Connect the machine directly
to your Macintosh
• Make sure that the cable does
not restrict the cover from
closing, or an error may occur.
a. b.
Insert the supplied CD-ROM into your Double-click the Start Here OSX icon.
CD-ROM drive.
c. d.
Click OK. For Mac OS
to 10.2.8 users,
click Add and then
choose USB.
For Mac OS ® X 10.3.x or greater users,
go to step 12.
® ®
PageManager
a.
Double-click the Presto! PageManager icon
When Presto! ® PageManager ® is
and follow the on-screen instructions.
installed, OCR capability is added to
Brother ControlCenter2. With Presto! ®
PageManager ® , you can easily scan,
share and organize photos and
documents.
For Mac OS ® X 10.2.4 to 10.3.8 users,
follow the on-screen instructions, and
download the software from the Brother
Solutions Center website.
What is Innobella™?
Innobella™ is a range of genuine consumables offered by Brother.
The name "Innobella™" derives from the words "Innovation" and "Bella"
(meaning "Beautiful" in Italian) and is a representation of the "innovative"
technology providing you with beautiful and long lasting print results.
a. b.
Lift the scanner Connect the USB cable to the USB
cover until it locks socket marked with a symbol.
securely into the The USB socket is inside the
open position. machine as shown below.
e.
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down b and close the scanner cover c.
1
.
®
3
2
Note
It may take a few minutes
for installation to complete.
After the installation, click
Restart.
e. f.
X 10.2.4 Choose your Quit Print Center.
®
model name, and
then click Add.
Finish
The installation is
now complete.