Installation
Before installation
Before installing the appliance,
read all of the information contained
in this chapter and also in the
"IMPORTANT SAFETY
INSTRUCTIONS" section.
Removing the protective film
The housing components are covered
by a protective film to prevent them
from damage during transport.
Please remove this film before
installing the housing components. It
can be peeled off easily without any
additional tools.
Installation materials
Telescopic wall bracket
for securing the ventilation system on
the wall.
32
6 screws 5 x 60 mm and
6 plugs 8 x 50 mm
for securing the ventilation hood on the
wall.
The screws and plugs are
designed for use in solid walls only.
Use different fasteners for other wall
construction types.
Make sure that the wall can support
the load.
2 M6 locknuts
for mounting the appliance unit
2 screws 3.9 x 7.5 mm
for securing the duct cover
Installation plan
See the installation plan for details of
the individual steps involved in the
installation of this appliance.