Power Management - Miele Puristic Canto DA 6596 W Operating And Installation Instructions

Operation (Manual mode)

Power management

The ventilation hood is equipped with a
power management system. Power
management helps to save energy. It
ensures that the blower power level is
reduced automatically and that the
lighting is switched off.
- If the booster level is selected, the
blower automatically switches to
level 3 after 5 minutes.
- If the blower is set to level 3, 2, or 1,
it switches back one blower setting
after 2 hours and then in 30-minute
intervals until the blower eventually
switches off.
- The overhead lighting will switch off
automatically after 12 hours.
You can deactivate power
management.
Keep in mind that this may increase
energy consumption.
22
Activating/deactivating power
management
 Switch off the blower and the lighting.
 Press the delayed shutdown
control  for approx. 10 seconds
until the 1 indicator appears in the
blower level display.
 Then press, in turn:
- the lighting control ,
- the  control, and then
- the lighting control .
When power management is turned on,
the 1 and B indicators will be
continuously lit.
When it is turned off, the 1 and B
indicators will flash.
 Press the  control to deactivate
power management.
The 1 and B indicators will flash.
 Press the  control to activate power
management.
The 1 and B indicators will be
continuously lit.
 Confirm the setting by pressing the
delayed shutdown control .
All the indicator lights will go out.
If you do not confirm the new setting
within 4 minutes, the ventilation hood
will revert to the previous setting.