Miele Puristic Canto DA 6596 W Operating And Installation Instructions page 29

After cleaning
 After cleaning, leave the filters on an
absorbent surface to dry.
 When removing the panels and
grease filters for cleaning, also clean
off any accessible oil or grease
buildup from the housing. Doing so
will prevent a fire hazard.
 Reinstall the grease filters. When
inserting the filters, make sure that
the locking clip is facing down.
 If the filters have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.
 Hook the panels onto the support
rod.
 Lift up the front of the panels and
push them into the lock until they
engage.
Cleaning and care
Resetting the filter saturation
indicator for the grease filters
Once cleaning is complete, the filter
saturation indicator must be reset.
 While the blower is turned on, press
the filter saturation indicator  for
approx. 3 seconds until 1 is the only
indicator flashing.
The grease filter symbol  goes out.
When cleaning the grease filters before
the full operating time has elapsed:
 Press the filter saturation
indicator  for approx. 6 seconds
until 1 is the only indicator flashing.
29