Clarion FX450 Manual page 13

11. SETUP MENU
Beep Tone
Tap to activate the keyboard sound.
Steering Remote Controller
You can sets the desired function in the
Steering Remote Controller.
Select the function you want the
Steering Remote to learning
Press and hold the same function button
on the Steering Wheel Remote until
"SUCCESS" is displayed.
Tap to reset all SWC learning
records, and tap
the current button learning
NOTE:
SWC must be connected to use this
function.
Language
Tap to select the Language.
Demo
Turn On or Off the demonstration mode
.
The default is Off
cancel or stop
.
Power Off Clock
Tap to Enable or Disable the power
off clock mode.
AV Setup
Tap into the Rear AV-IN mode
[AV-IN] / [DTV] / [DVR] mode, then
activate the selection function.
Default Volume
This function allow to change the Default
Volume Level.
The default volume level is 15.
NOTE:
The volume is over than the
default level 15, When turn ACC
/Power Off and Restart, the
volume will be default level 15.
The volume is less than the
default level 15, When turn ACC/
Power Off and Restart, the volume
will be keep the current level.
sets the
EN-13