Table of Contents
Advertisement
Observe the information in your
router's documentation.
a flashes in the display.
a The device is trying to connect
to do with the WiFi home
network.
aWhen on the display con is becoming
displayed and permanent
lights up, the device is
connected to the home network.
When on the display err is
4.
displayed, the device is not
connected to the home network.
Check if your device is within
-
range of the home network.
Reconnect the device to WLAN
-
home network (WiFi) with WPS
function.
Connect the appliance to the
5.
Home Connect app. → Page 44
15.2 Connecting a device to a
WLAN home network
(WiFi) without WPS
function
If your router does not have a WPS
function, you can manually connect
the device to your WLAN (WiFi) home
network. The device briefly sets up its
own WiFi network. You can connect to
the WiFi network with a mobile
terminal device.
work and transfer the network
information from the WLAN home
network (WiFi) to your device.
Required: The Home Connect app is
open and you have logged in.
At least 3 s on Control via
1.
app
to press.
a The display shows auto reflected
to give.
Set program to level 2.
2.
a The display shows JUICE reflected
to give.
Press Start/Refill
3.
a flashes in the display
a The device will now create its own
WiFi network with the network name
(SSID) HomeConnect.
Call up WiFi settings in the mobile
4.
end device.
Connect the mobile end device to
the HomeConnect WiFi network
and enter the WiFi password (Key)
HomeConnect.
a Your mobile end device connects
themselves with the device. The
connection procedure can take up
to 60 seconds.
Home Connect
.
.
43
NL
Advertisement
Table of Contents
