Table of Contents
Advertisement
a The device is connecting
with the Smart Energy system
(energy manager).
aWhen on the display con and
is displayed, the device has
successfully connected to the
energy manager.
If the device is to be started by the
4.
Smart Energy system (energy
manager), activate Flexstart.
→ "Activating Flexstart", Page 45
Activate Flexstart
Activate Flexstart so that your Smart
Energy system (energy manager) can
start your device when your own PV
system generates sufficient energy or
the electricity tariff is low.
Required: The Smart Energy system
(energy manager) can only start the
device when the Smart Energy
system (energy manager) and the
device are connected.
Set the desired programme.
1.
Press - Ready in + and set the
2.
desired time period.
Press Start/Refill
3.
Press Control via App
4.
a The display shows
Flexstart is activated. the app-
raat is waiting for a remote start
via the Smart Energy system
(energy manager).
aWhen the display shows the weather
giving the time to eg 8 h system
then the Smart Energy has set the
(energy manager) starts a
time when the appliance
standby.
aWhen the Smart Energy system
tem (energy manager) the device
do not run program independently
starts, then the device starts it
within the set time, for the
.
.
on and the
expiry of the set time period. The
program ends when this time
frame is over.
Onote
The Flex Start is deactivated
for safety reasons under the
following circumstances:
¡ Press Start/Refill
¡ Open the door.
¡ Turn off the device.
¡ Power cut.
15.5 Activate WiFi on the device
Note: The energy consumption
increases compared to the values
indicated in the consumption value
tables when Wi-Fi is activated.
Approx. 3 s onControl via App
1.
know.
Set program to position 4.
2.
a The display shows Con reflected
to give.
Press Start/Refill
3.
the display on displays.
aWiFi is activated.
Note: The device does not turn off
automatically when WiFi is activated.
15.6 Deactivate WiFi on the
device
On for at least 3 seconds Operate
1.
via App
to press.
Set program to position 4.
2.
a The display shows Con reflected
to give.
Press Start/Refill
3.
the display OFF displays.
aWiFi is deactivated.
Home Connect
.
pressure-
until
until
45
NL
Advertisement
Table of Contents
