JOVY Systems RE-8500 Quick Start Up Manual page 5

Quick Start Up Guide
3- Manual operating mode
1- Scroll down from main
menu (down button),
Choose Manual Control
from main menu
3- Set the Alarm temperature
value. Set the fan
operating level above 0%
to 100%
 Stop the heaters (Heaters Power :Stop) any time by press cancel
 Change the heaters power level at any time and during the process by
scrolling to the heater and use +/- to increase or decrease the value.
 Run the fan from the manual control menu will stop the heaters and
operate it in power level percentage preset before process or new
value.
5 Jovy Systems® Limited
RE-8500
2- Set the heaters power
level, upper heater is the
main reflow part (zone 1),
side heaters – left and
right sides – both together
(zone 2) and middle heater
– below the reflow
part(zone 3).
4- Run the process by press
Ok button.