JOVY Systems RE-8500 Quick Start Up Manual page 12

Quick Start Up Guide
- Before the process running, Set the process Graph
parameters length for the graph in time, maximum
Temperature scale, temperature scaling method.
- Confirm the Safety temperature Value
- Stop the process after reaching the targeted melting
point.
- Stop the heaters any time during the process to dwell
on certain temperature or to achieve the TAL for
soldering process.
- Change the heaters powers between heating stage to
another or end dwell at any stage.
4- Process Profile Settings and Parameters
a. Free Mode profile
The free mode profile controlling concept is PID depends on user
settings. The control will drive the heaters according the heaters power
for each stage to reach the phase end temperature.
- From the main Tab select Jovy Profiles then Jovy
Profile Editor
- From Profile Editor Tab select free mode profile,
choose a name for the profile, set the profile phases
end temperature and display message after each
phase ends. Alarm set point for warning sound could
be set either.
12 Jovy Systems® Limited
RE-8500