JOVY Systems RE-8500 Quick Start Up Manual page 4

Quick Start Up Guide
2- Get started
- Install the X/Y table as per the instruction manual include with the
RE-8500 package
1-Place the PCB over the
X/Y table, use large PCB
support JV-LSU8 and/or
small PCB support JV-SSU
3-
3- From main menu
scroll down to 3-Settings
4 Jovy Systems® Limited
2
1
2-Connect the thermocouples
to TC1 and TC2 ,Two
thermocouples must use for
running profiles, manual
operating method run with One
or Two Thermocouples
4- Adjust the safety temperature
set point. Set the temperature
unit ◦C or ◦F
RE-8500