Bosch FPP 5000 Installation Manual page 19

External power supply kit
Output current (min-max) (x 2)
Power source (EN 62368-1)
Electrical source (EN 62368-1)
Open collector faults BAT, AC, Σ:
Voltage/current used internally by FPP 5000
Power source (EN 62368-1)
Electrical source (EN 62368-1)
FPP-5000 Mechanical
Housing material
Housing color
Front color
Dimensions (installed)
FPP-5000 Environmental conditions
Safety class according to EN 62368-1
Permissible ambient temperature during
operation
Permissible storage temperature
Relative humidity
Protection category
Cooling
*Do not obstruct the vent holes.
Short circuit isolator
Line voltage (V
Max. rated continuous current, switch closed (l
max)
Max. rated switching current under short condition
(l
S
Max. leakage current, switch open (l
Max. series impedance, switch closed (Z
Line voltage, which leads from closed to open
condition (V
Line voltage to allow the device to be put into
closed condition by the panel (V
Max. current consumption from LSN during
initialization, following initialization
Bosch Sicherheitssysteme GmbH
to V )
min max
max)
max to V min)
so so
0 - 2.8 A
PS 2
ES 1
0 V / 0 - 20 mA
PS 2
ES 1
Sheet steel, painted
Slate gray, RAL 7015
Anthracite, RAL 7016
Approx. 527 x 456 x 236 mm
Class 1 equipment
-5 °C to 50 °C
-20 °C to 60 °C
Max. 95% non-condensing @25 °C
IP 30
Natural convection*
15 to 33 V
1.5 A
C
1.7 A
max) 23 μA
L
max) 440 mΩ
C
10 to 1 V
15 to 33 V
min to V max)
sc sc
< 0.4mA, < 0.25mA
Installation manual
Technical data | en 19
2021.04 | 8.0 | F.01U.005.065