Delta-q QOOL EVOLUTION Instruction Manual page 21

EN INSTRUCTIONS AND MODE OF USE
20
A. B.
A. B.
Fig. 19: Programming the tea
extraction button.
Programming the tea extraction button.
Note: The pre-defined factory volume for the tea extraction
button is around 180cc.
• T o alter the volume of your drink, ensure the machine is ON (see
Fig.5), check whether there is any water in the water tank and
wait until the control panel buttons indicate "Ready to use" (see
Fig. 7).
• Then press the tea extraction button until the indicator lights
of the espresso and the coffee extraction buttons start blinking.
Press the tea extraction button (see Fig. 19).
C.
The indicator lights of the espresso and the coffee extraction
buttons go out.
C. Note: If the user does not press again the tea extraction button after
1 minute, the equipment will revert automatically to the "Ready to
use" mode.
• As soon as extraction has reached the desired dosage, press the
tea extraction button again and the operation is complete.
The equipment memorises this volume and will start extracting
it until new programming has been defined.
• After completing extraction, the equipment returns to "Ready
to use" mode (see Fig. 7).
Note: If the user fails to press the extraction button to complete
the operation, the equipment will automatically assume the
maximum volume of 200cc.