Content 1. PRODUCT INFORMATION ......................3 2. LIST OF ACCESSORIES AND DETACHABLE PARTS ............3 3. PRODUCT DIAGRAM ........................4 4. OPERATION METHOD ........................6 5. SAFETY PRECAUTIONS ........................9 6. FEATURES ............................18 7. CLEANING, MAINTENANCE AND DISPOSAL ..............18 8.
2. LIST OF ACCESSORIES AND DETACHABLE PARTS Smart Neck Massager (host, Model:4098(or 4098 (RED), or 4353)); User manual (including the warranty card); Remote control; Conforming Certificate;...
Page 7
At least 30 min required for ME equipment to warm from the minimum storage temperature between uses until it is ready for intended use. At least 30 min required for ME equipment to cool from the maximum storage temperature between uses until it is ready for intended use. ...
Page 8
- Output: DC 5 V; 1 A - Rated input voltage shall not exceed 250 V - Classification of protection against electric shock: Class II - The adapter need to comply with IEC 60601-1, and provide 2 MOPP (two means of patient protection) between primary circuit and secondary circuit. Lithium Battery Rechargeable Lithium Battery for Massager: 1) During the use of the therapy device, when the beep is “spit”...
5. SAFETY PRECAUTIONS 5.1 Precautions The warning signs, warnings, and illustrations shown in this manual are intended to enable you to use the product safely and correctly and to prevent injury to you and others. The device can’t be used with other medical electronic instruments, such as cardiac arresters, artificial heart and lungs, medical electronic devices such as medical electronic devices, electrocardiographs, etc., otherwise it will cause danger.
Page 11
Do not applied the stimulation across or through the head, directly on the eyes, covering the mouth, on the front of the neck, (especially the carotid sinus) or from electrodes placed on the chest and the upper back or crossing over the heart, etc.
Page 13
If cause allergic reactions due to the use of this product, or the performance of ME equipment has changed, stop using it immediately and consult a doctor. The patient is an intended operator. The patient can perform electronic treatment, change battery of remote control and charging the rechargeable battery under normal circumstances.
Page 14
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
6. FEATURES According to ergonomic design, aesthetic science, in line with neck curve, with hot moxibustion, low frequency electric pulse, electromagnetic effect, circular traction, four-in-one synchronous treatment to form a high using the latest 3D smart fit technology, according to your neck. The curve is easy to adjust the electrode for more comfortable use;...
Page 22
Use faults and solutions 1) The internal rechargeable battery is low, unable to know, and the controller battery is dead. Please confirm if the host product open button has been pressed. 2) Can’t charge Please check if the USB cable and the host and phone power adapter are normal.
SYMBOLS AND SAFETY SIGN Symbol Description Refer to instruction manual/ booklet Type BF applied part Serial number Manufacturer Date of manufacture IP classification: IP22 The first number 2: Protected against solid foreign objects of 12,5mm Ф and greater. The second number 2: Protected against vertically falling water drops when enclosure titled up to 15º...
EMC GUIDANCE Guidance and manufacture’s declaration – electromagnetic emission The No touch Infrared Body Thermometer is intended for use in the electromagnetic environment specified below. The customer of the user of the No touch Infrared Body Thermometershould assure that it is used in such an environment.
Page 25
Voltage dips, short Not applicable Not applicable Mains power quality should be that of interruptions and a typical commercial or hospital voltage variations on environment. If the user of the No power supply input touch Infrared Body Thermometer lines requires continued operation during power mains interruptions, it is IEC 61000-4-11 recommended that the No touch...
Page 26
Where P is the maximum output power rating of the Radiated RF 10 V/m 10 V/m transmitter in watts (W) according to the transmitter manufacturer and d is the recommended separation IEC 61000-4-3 80 MHz to 2.7 GHz distance in metres (m). Field strengths from fixed RF transmitters, as Proximity fields determined by an electromagnetic site survey,...
Page 27
Recommended separation distances between portable and mobile RF communications equipment and the No touch Infrared Body Thermometer. TheNo touch Infrared Body Thermometer is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the No touch Infrared Body Thermometer can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the No touch Infrared Body Thermometer as recommended below, according to the maximum output power of the communications equipment.
CONTACT INFORMATION Guangdong SKG Intelligent Technology Co., Ltd. Address: Building A, 7 Floor, Yingfeng Business Center, No.8 Yixing Road, Junlan Community Residents Committee, Beijiao Town, Shunde, Foshan, Guangdong, China. Customers service hotline: 0757-29811111 For more information, please visit: www.SKG.com...
Need help?
Do you have a question about the 4098 and is the answer not in the manual?
Questions and answers