3/ Setting The Stem And The Handlebar; 4/Safety - Decathlon BTWIN User Manual And Guarantee

3/ Setting the stem and the handlebar

For your safety, the handlebar may be extended until the maximum
markers.
Maxi
(diagram 1)
• Road
Once the height of the saddle has
been defined, establish the difference
of 2 to 5 cm less, between the height
of the saddle and the height of the stem in a position that suits you, in any case
never exceed the dimension set by the manufacturer on the stem.
• Town/hybrid
Set the height of your handlebars to give you an upright and comfortable
position.
• MTB
Diver stems may be extended to the maximum markers (the stem may be extended
to the maximum markers (diagram 1). A Headset type stems cannot be set, except
adding a rain to raise it a little.

4/Safety

Are your saddle pin and stem properly tightened?
Firmly turn from one side to the other blocking the front wheel between your legs.
The stem should not move on the steering pivot. The saddle pin should also be
properly tightened in the saddle tube.
SAFETY: be careful not to exceed the manufacturers mark except uncertain moun-
tain bikes with an lowered upper tube wear the length of saddle pin should be
kept inside the frame.
Are your tires properly inflated, are they the correct dimension,
are they mounted in the right way?