Sending A Fax; Entering Fax Mode; Faxing From The Adf; Cancelling A Fax In Progress - Brother FAX-1355 User Manual

5

Sending a fax

Entering Fax mode

To enter fax mode, press
the key will glow green.

Faxing from the ADF

a
Make sure you are in Fax mode
b
Put the document face down in the ADF.
c
Dial the fax number.
d
Press Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If the memory is full, the document will be
sent in real time.

Cancelling a fax in progress

If you want to cancel a fax while the machine
is scanning, dialling or sending, press
Stop/Exit.
22

Broadcasting

5
Broadcasting is when the same fax message
(Fax), and
is automatically sent to more than one fax
number. You can include Groups,
One-Touch, Speed-Dial numbers, and up to
50 manually dialled numbers in the same
5
broadcast.
. After the broadcast is finished, a Broadcast
Report will be printed.
a
b
c
d
e
5
• If you did not use up any of the numbers
• The available memory will vary depending
• If the memory is full, press Stop/Exit to
Make sure you are in Fax mode
Load your document.
Enter a number. Press OK.
You can use either a One-Touch, a
Speed-Dial, a Group, or a manually
entered number.
Repeat c until you have entered all the
fax numbers you wish to broadcast to.
Press Start.
Note
for Groups, you can 'broadcast' faxes to
as many as 160 different numbers.
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access.
stop the job. If more than one page has
been scanned, press Start to send the
portion that is in the memory.
5
5
.