Nikon COOLPIX 3100 Quick Start Manual page 5

Untitled Document
4
5
file:///K|/3100fw13WIN.html (5 of 11) [6/22/2010 11:29:07 AM]
UC-E6
USB cable
Rotate the mode dial to
(auto) or (manual) and turn the camera on.*
• If Nikon View is installed
Nikon Transfer will start automatically and display the message, "Camera or
card contains no images. Nikon View will now terminate." Click OK
to exit Nikon Transfer.
• If PictureProject is installed
PictureProject Transfer will start automatically. Click Cancel.
* Under Windows
XP, a Removable Disk dialog similar to that
shown at right may be displayed.
Select Take no action and click OK.
Copy the firmware to the memory card.
5-1. Copy the firmware to the removable disk corresponding to the
camera.
When the camera is connected and turned on, a new "Removable Disk" icon
will be displayed in My Computer. Copy the "firmware" folder from the
"E3100Update" folder to this removable disk. ;