Sealey AK2935 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instructions protection
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
‰
equipment.
WARNING! Always wear approved eye or face protection when operating the torch.
‰
WARNING! Butane gas is extremely flammable, handle with care.
‰
WARNING! Always point the torch away from the eyes, body or flammable objects when igniting and during operation.
‰
WARNING! Ensure the Gas Controller Knob is firmly closed and the flame completely extinguished after use.
‰
WARNING! Do not puncture the cartridge or dispose of in a fire.
‰
Use only specified gas (Sealey Gas Charger Butane SCS035S)
‰
DO NOT use the torch in an area where paint fumes, solvents or other flammable solids, liquids or gases pose a potential hazard.
8
Keep flammable material away from the torch when operating. Flammable waste, such as wiping or cleaning rags, must be placed
9
in a closed metal container and disposed of correctly.
DO NOT operate the torch when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
DO NOT hold the workpiece by hand. Use clamps or a vice (not included) to secure the workpiece.
8
DO NOT operate the torch if any parts are damaged or missing as this may cause failure and/or possible personal injury.
8
DO NOT touch the workpiece close to the heated area as it will be very hot. Allow to cool.
8
DO NOT touch the burner tube during or immediately after use as it will be very hot. Allow to cool.
8
DO NOT leave the torch operating unattended.
8
DO NOT allow children to operate the torch.
8
Disconnect the gas cartridge when not in use. Store cartridge away from direct sunlight in a safe, dry, childproof area, where the
9
temperature will not exceed 40°C (104°F).
After use, allow the torch to cool before storing it.
9
Important! Observe cautions on the gas refill cartridge label.
2. INTRODUCTION
Heavy-duty butane powered hot air gun. Fitted with piezoelectric ignition with anti-flare burner, ignition lock and continuous flame switch.
Produces an adjustable flame with a maximum temperature of 550°C and will operate on a single fill for up to 3 hours. Suitable for numerous
automotive applications. Supplied with a deflector nozzle ideal for use with heat shrink tubing and fish tale nozzle for use when paint stripping.
Includes integrated hands free collar.
3. SPECIFICATION
Model No ................................................................... AK2935
Hot air gun 450/550°C - Butane
Sealey Gas Charger Butane (not included) ............ SCS035S
© Jack Sealey Limited
INSTRUCTIONS FOR
HOT AIR GUN 450/550°C-BUTANE.
MODEL NO:
Wear protective Hot surfaces
gloves
fig.2
Original Language Version
AK2935
fig.1
AK2935 | Issue 1 18/07/17