Milwaukee M18 HD18 AG125 Operator's Manual
Cordless cut-off / grinder
Hide thumbs
Also See for M18 HD18 AG125:
- Original instructions manual (68 pages) ,
- Operator's manual (12 pages) ,
- Original instructions manual (68 pages)
Related Manuals for Milwaukee M18 HD18 AG125
Summary of Contents for Milwaukee M18 HD18 AG125
- Page 1 OPERATOR'S MANUAL Cat. No. HD18 AG125 M18™ CORDLESS 125mm (5") CUT-OFF / GRINDER TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL.
-
Page 3: Work Area Safety
general poWer Tool safeTy Warnings Warning read all safeTy Warnings and all insTrucTions. Failure to follow the warnings and instructions may result in electric shock, fire and/or save all warnings and instructions for future reference. serious injury. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. result in personal injury. Work area safeTy • D o not overreach. Keep proper footing and • K eep work area clean and well lit. -
Page 4: Specific Safety Rules
coins, keys, nails, screws, or other small metal and workshop apron capable of stopping objects that can make a connection from one small abrasive or workpiece fragments. The terminal to another. Shorting the battery terminals eye protection must be capable of stopping flying together may cause burns or a fire. debris generated by various operations. The dust • U nder abusive conditions, liquid may be eject- mask or respirator must be capable of filtrating ed from the battery; avoid contact. If contact... - Page 5 • Maintain labels and nameplates. These carry breakage. Flanges for cut-off wheels may be dif- important information. If unreadable or missing, ferent from grinding wheel flanges. contact your authorised MILWAUKEE (tm) ® • Do not use worn down wheels from larger dealer for a replacement label.
-
Page 6: Specifications
SPECIFICATIONS Warning To reduce the risk of injury Volts No Load Spindle Wheel Thickness Cat. No. when grinding: Size • ALWAYS use the proper guard. 10000 125mm (5") HD18 AG125 • ALWAYS properly install the guard. • ALWAYS hold the tool firmly with both SYMBOLOGY hands using the handles provided before and during grinding. Volts • NEVER use a wheel that has been dropped. •... -
Page 7: Operation
Installing/Removing Accessories Controlled Start Make sure the wheel does not extend beyond the The controlled start feature reduces the torque bottom of the guard. Threaded hub grinding wheels reaction "jerk" when its trigger is pulled. may require a deeper guard (see "Accessories"). Paddle Switch Operation 1. - Page 8 using grinding Wheels using Wire brushes Warning Warning To reduce the risk of injury, Everyone in the area must the operator should be instructed in the use, wear protective clothing and safety goggles care and protection of grinding wheels. or face shields. Fatigued wires and residue will fly off the brush with considerable force, Grinding Wheel Selection causing potential for serious injury. Use grinding wheels, and accessories that are: • correct size as written on tool’s nameplate. Wire brushes are useful for removing rust, scale, •...
- Page 9 Sanding using sanding discs Hold tool at 5° to 15° angle to ensure proper sand- Sanding Disc Selection ing pressure and control. Too great an angle will Use sanding discs and accessories that are: result in too much pressure and could cause exces- •...
-
Page 10: Maintenance
If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack. If the tool still does not work properly, return the tool, charger and battery pack, to your authorised MILWAUKEE ® dealer for repairs. WARNING... -
Page 11: Warranty - Australia And New Zealand
SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...