Linea Dealer. Failure to follow the instructions, warnings and notes in this manual and those located on your Linea product can result in personal injury or product damage and will void the Linea product warranty. Authorised Dealer:...
MODIFICATIONS Linea chairs are designed and engineered to provide maximum comfort and utility. However, to prevent personal injury and/or damage to your lift chair, you should not modify, add, remove or disable any feature, part or function of your lift chair.
WARNING! Do not place objects or appendages in the path of moving parts. STORAGE AND OPERATION TEMPERATURES Transportation or storage: -75°C/-104°F to 70°C/158°F Operation: 10°C/50°F to 40°C/104°F WARNING! Do no sit across the Do not sit on the chair, the armrests are footrest when it is not designed to take raised...
Before using your lift chair, make sure your delivery is complete as some components may be packaged individually. If you do not receive a complete delivery, please contact your authorised Linea Dealer immediately. Where damage has occurred during transport, either to the packaging or content, please contact the delivery company responsible.
ELECTRICAL COMPONENTS Your Linea Lift Chair is equipped with a low voltage DC motor system that reduces the standard household alternating current of 90V AC - 264V AC to direct current (24/39V DC).
ASSEMBLY Your lift chair will require some assembly before initial use. LIFT CHAIR SET-UP The chair is packed in two pieces consisting of the back and the base to make transport and delivery easier. Assemble the chair as per the assemble instructions below.
Page 9
2. The rear of the base of the chair has a vertical flat bar on each side as per above image (B). 3. To assemble the chair simply lower the back receiver brackets onto the vertical flat bars until they are fully seated on both sides. NOTE: Both back receivers need to be lowered onto the flat bars at the same time and evenly to prevent binding.
Page 10
If you discover a problem at any point during the set-up and positioning of your lift chair, stop and contact your authorised Linea Dealer immediately. To avoid personal injury and/or product damage, do not plug the unit into the electrical outlet until the problem is corrected and do not attempt to fix electrical problems by yourself.
OPERATION SAFE OPERATING PRECAUTIONS There are certain precautions that should be taken during the operation of your lift chair. Read and follow these precautions carefully in order to ensure safe lift chair operation and to prevent injury and/or product damage. •...
Page 12
HAND CONTROL OPERATION The hand control is equipped with switches that control the movement of the chair-back, chair base and footrest Do not lean on or apply downward force to the chair-back when the lift chair is in the fully reclined position. Doing so could cause the lift chair to tip, resulting in personal injury and/or product damage.
Page 13
FOLLOW THESE STEPS TO SIT IN YOUR LIFT CHAIR SITTING IN YOUR CHAIR: Ensure the back rest is up and the footrest is folded down before sitting in your chair. When sat safely in the chair, press and hold the ‘Chair Recline / Seat Down’ button until you achieve the desired angle to comfortbaly sit in.
TROUBLESHOOTING Your Linea Luxury Wall Hugger is a state-of-the-art product designed to enhance your mobility. Your lift chair should bring you years of trouble-free service, however, it may require occasional troubleshooting. The following troubleshooting tips and FAQs should summarise what you need to know about your lift chair.
Page 15
• The floor may be uneven or the carpet may be affecting chair position. Adjust the leg levellers in the area where the chair is rocking. Who do I call for service? • Contact your authorised Linea Dealer for service PAG E 13...
CARE & MAINTENANCE Your Linea Luxury Wall Hugger will require routine maintenance checks. You can perform some of these checks, but others may require assistance from an authorised Linea Dealer. By following the maintenance checks in this section as scheduled, you can help ensure your lift chair gives you years of trouble-free operation.
Page 17
ELECTRONICS CARE • Inspect all wiring harnesses to make sure they are not damaged or frayed. • If damage is present, unplug the lift chair and contact your authorised Linea Dealer for service. • Keep all electronics free from moisture and temperature extremes.
QUALITY / WARRANTY DECLARATION Products are to be fit for purpose and of excellent quality and performance. For valid warranty claims Linea will, at their discretion, replace / repair / refund items mutually agreed to be defective. The lift chair’s warranty is as follows: •...