Troubleshooting - Linea Luxury Wall Hugger User Manual

TROUBLESHOOTING

Your Linea Luxury Wall Hugger is a state-of-the-art product designed to
enhance your mobility. Your lift chair should bring you years of trouble-free
service, however, it may require occasional troubleshooting. The following
troubleshooting tips and FAQs should summarise what you need to know
about your lift chair. If at any time you do not feel comfortable performing the
troubleshooting steps listed in this manual, contact your authorised dealer for
service. Please have the model number, serial number and nature of the problem
when calling.
FREQUENTLY ASKED QUESTIONS
What if my lift chair does not operate at all?
• Ensure the external transformer is plugged into a properly wired
electrical outlet.
• Check the circuit breaker box connected to the electrical outlet to
ensure the outlet is receiving power.
• Ensure the low voltage connection cable is plugged into the external
transformer.
• Ensure that all cables are connected properly.
• Check all cables for signs of damage (cuts, flattened areas).
What if my lift chair operates in one direction only?
• Check the up and down buttons or toggle switch on the hand control to
make sure they do not stick. If the buttons or switch are sticking in either
position, the hand control may need to be replaced.
• Contact your authorised Linea Dealer for further assistance.
PAGE 1 2