Linea Luxury Wall Hugger User Manual page 15

What if my lift chair stops during a lifting cycle?
• Your lift chair is equipped with an internal thermal shut-off switch located
inside the external transformer that prevents the motor control box from
overheating. If the thermal shut-off activates, allow the lift chair to remain in
a stationary position for 10 minutes to allow the motor to cool, then resume
normal operation. If you notice the motors overheating frequently, contact
your authorised Linea Dealer.
• There may have been a power failure and/or there are no batteries in the
external transformer or the batteries have no charge. Always make sure there
are fresh 9V batteries in the external transformer if equipped with battery
backup.
• Check the circuit breaker box connected to the electrical outlet.
What if my lift chair is rocking from corner to corner after I position the chair?
• The floor may be uneven or the carpet may be affecting chair position. Adjust
the leg levellers in the area where the chair is rocking.
Who do I call for service?
• Contact your authorised Linea Dealer for service
PAG E 13