Advertisement
Quick Links
LINEA CONFERENCE TABLE
HBF
GENERAL NOTES
1. ALWAYS PROTECT THE WORKSURFACE DURING INSTALLATION.
2. ALWAYS LEVEL UNIT(S) AT FINAL LOCATION.
3. TWO PERSON ASSEMBLY REQUIRED
HARDWARE
A
19917-4774-36 SCR #4X3/4L FH PH
1 TABLE NEEDS TO BE ASSEMBLED AND UPRIGHT
- A TABLE WITH ONLY ONE DATA PATH IS SHOWN
COULD BE A COMBINATION OF DATA PATHES.
2 PLACE ASSEMBLED DATA PATH IN THE CUTOUT FROM
BELOW TABLETOP. SECURE WITH SCREWS.
-THE TOP EDGE SHOULD BE FLUSH OR JUST
BELOW TABLETOP SURFACE.
-SECURE WITH #4X3/4L WOOD SCREW THROUGH
ALL HOLES ON THE INTERIOR OF THE FRAME.
INSTRUCTIONS FOR ASSEMBLY OF
DATA PATH 36 (3DR) AND 60 (5DR)
B
DATA PATH ASSEMBLY (3DR) OR (5DR)
D1013-0002-00
PAGE 1
Advertisement
Related Manuals for Linea HBF
Summary of Contents for Linea HBF
- Page 1 LINEA CONFERENCE TABLE D1013-0002-00 PAGE 1 INSTRUCTIONS FOR ASSEMBLY OF DATA PATH 36 (3DR) AND 60 (5DR) GENERAL NOTES 1. ALWAYS PROTECT THE WORKSURFACE DURING INSTALLATION. 2. ALWAYS LEVEL UNIT(S) AT FINAL LOCATION. 3. TWO PERSON ASSEMBLY REQUIRED HARDWARE 19917-4774-36 SCR #4X3/4L FH PH...
- Page 2 LINEA CONFERENCE TABLE D1013-0002-00 PAGE 2 3 ADJUST AND ALIGN DOORS -LOOSEN THE SCREWS SLIGHTLY ON THE PIVOT BLOCKS OF THE DOORS (SEE FIGURE 1) -ADJUST THE DOORS SO THE GAPS ARE EQUIDISTANT AND TOPS ARE FLUSH WITH TABLETOP (SEE FIGURE 2)