Table of Contents
Advertisement
3. Find the RAM module and flip the ejector clips outwards to remove the memory
module from the memory slot.
5-5.
Replacing the SSD
1. Remove the cable cover, batteries, and rear cover first (see Chapter 5-1, 5-2 and
5-3).
2. Remove the screw (x1) and slide the SSD module outwards to release it from the
SATA cable.
3. Remove the screws (x2) that fix the SSD to the bracket.
Installing a RAM moudle
Slide the memory module into the
memory slot anvd press down until the
ejector clips snaps in place.
12
Advertisement
Table of Contents
