System Assembly; Removing The Cable Cover; Replacing The Battery - FlyTech K959 User Manual

5.

System Assembly

5-1.

Removing the Cable Cover

1. Place the system face down, make
sure not to scrath the screen.
2. Press and pull the cable cover
outwards to release it from the
system.
5-2.

Replacing the Battery

1. Place the system face down, make
sure not to scrath the screen.
2. Remove the rubber pads (x6) and
screws (x6) to relesae the battery door.
3. Slide the latch down as shown to unlock.
4. Pull the plastic puller (see picture) to
release the battery out of the system.
10