Removing The Rear Cover; Replacing The Ram - FlyTech K959 User Manual

5-3.

Removing the Rear Cover

1. To open the rear cover of the system,
please follow the steps described in
Chapter 5-1 and 5-2 to remove the
cable cover and batteries first.
2. Remove the rubber pads (x9) and
loosen the screws (x10) of the rear
cover.
3. Gently lift the cover aside, the
power button at the bottom left
corner is connected to its cable
inside, be careful not to pull off
the cable while lifting the rear
cover.
5-4.

Replacing the RAM

1. To replace the RAM module, please remove the cable cover, batteries, and
rear cover first (see Chapter 5-1, 5-2 and 5-3).
2. The motherboard is secured by the metal housing, remove the screw (x1) to
release the insulation cover located on top of the metal housing.
11