Advertisement
ENGLISH
PRODUCT GUARANTEE:
The product is guaranteed as per Italian Presidential Decree 224 of 24/05/1988 in Italy and the rest of the EU and as per CEE Directive 85/374 in terms of
product liability.
The Manufacturer guarantees its products against manufacturing and material defects – provided these are confirmed by the authorised personnel of the
Company – for a period of 48 months from the purchase date, as indicated by the receipt or invoice.
The guarantee covers repairs to and/or replacement of the parts considered to be faulty. The guarantee does not cover complete replacement of the product.
The guarantee does not cover the lights, warning lights, fuses, glass parts, mirrors and decoration parts unless these are faulty due to production defects
and not due to neglect or improper use. The guarantee does not cover any parts and components which are faulty or damaged due to negligence or
carelessness during use, incorrect installation or maintenance, operations carried out by non-authorised personnel, damage caused during transport or any
other circumstances not due to product manufacturing defects, such as sudden electricity jolts, lightning, electrolysis, corrosion and, in general, any causes
related to the nature of the water and electrical and water supply systems in the place where the unit is used. The Purchaser must check that the product is
not damaged in any way before installation and must contact the agent or authorised assistance centre immediately if any faults are detected. The guarantee
will only be applied on presentation of a document indicating the purchase date.
In the event of operations without proven defects or to illustrate how to use the product, all the expenses are sustained by the Purchaser. Any repairs or
modifications carried out by personnel not authorised by the Manufacturer will not be covered by the guarantee and will render the remaining guarantee
period immediately null and void.
The Manufacturer is not responsible in any way for any direct or indirect damage caused to persons, animals or things due to failure to comply with all the
regulations in the installation, instruction and maintenance manual supplied with the product.
Any disputes will be dealt with exclusively by Mantova Italy, Law Court.
This symbol indicates important product instructions or important safety information.
IMPORTANT:
Before you start to assemble and install the product, carefully read through all the instructions. Unpack the components and check that nothing is missing
and that there are no damaged or faulty components, remove the transparent protective film. Before you install the shower cubicle in its final position, perform
a test run. Run the unit for several minutes and check for water leaks and any damage caused during transport and handling. This product should be installed
by suitably skilled personnel.
N.B.: This product is designed for installation on finished walls and floors.
Warranty claims must be produced with the purchase invoice and the product assembling instructions.
The drawings and illustrations in this manual are provided for information purposes only.
The manufacturer reserves the right to make changes and improvements without prior notice.
Cleaning the shower unit:
CARING FOR YOUR CUBICLE:
The cubicle panels are made with acrylic parts and must be cleaned using a liquid detergent and a soft cloth or sponge. Use a good quality household liquid
detergent. To prevent scale deposits, wipe dry using a chammy leather or a soft lint-free cloth that removes stubborn deposits without leaving traces. Limescale
deposits may be removed using specific detergent products. To restore shine to the acrylic surface polish with an ordinary wax polish such as car wax. DO
NOT USE ABRASIVE CLEANERS, ALCOHOL OR ALCOHOL BASED PRODUCTS, ACETONE OR OTHER SOLVENTS.
Troubleshooting:
Before calling the Service Centre, check that:
- The hoses are properly connected and not kinked.
- Hot and cold water is being correctly delivered to the wall fittings.
- The water supply system was bled before the shower unit was installed.
If you have followed the instructions and the shower still does not work, call the nearest Service Centre. The telephone numbers of authorised service centres
are given in the enclosed list.
Waste disposal:
To dispose of the shower unit or any part of it, follow local waste disposal regulations. In Italy, Legislative Decree No. 22 of 5 February 1997 applies. In other
EU countries, the subject is governed by directives 91/156/EEC, 91/689/EEC and 94/62/EC.
Romanore di Borgoforte, lì 31.10.2008
Opus Engineering S.r.l.
Alberto Filipponi
Amministratore delegato
-29-
Advertisement
