Table of Contents
Advertisement
PC Elite Reference
_________
Problems!
If the system fails to power up normally check the
following.
i.)
Ensure that the PC ELITE IEEE card is installed
correctly.
ii.)
Ensure that other cards in the PC have not been upset.
iii.)
Ensure that the power is connected and the PC is
switched ON!
iv.)
Ensure that the IRQ jumper block is set correctly (default
NO IRQ).
v.)
Ensure that the PC ELITE IEEE i/o address is set
correctly (default 02E1h).
If all these have been checked and the PC still does not
power up the there is probably a conflict of i/o address between
the PC ELITE IEEE board and another board in the PC. Ask
your dealer to check this.
2-22
Installation Guide
Chapter 2
Advertisement
Table of Contents
