Figure 2-11. Connecting The Pc To The Ieee Bus; Figure 2-12. Standard Ieee 488 Connector Pinouts - Brainboxes IE-285 User Manual

Installation Guide
____________________________________________

Figure 2-11. Connecting The PC To The IEEE Bus.

____________________________________________ _

Figure 2-12. Standard IEEE 488 Connector Pinouts.

Pin 1 Data bit 0
Pin 2 Data bit 1
Pin 3 Data bit 2
Pin 4 Data bit 3
Pin 5 EOI
Pin 6 DAV
Pin 7 NRFD
Pin 8 NDAC
Pin 9 IFC
Pin 10 SRQ
Pin 11 ATN
Pin 12 Shield (GND)
Chapter 2
Connect the other end of the
IEEE cable to the 24 way
IEEE connector on the back of
the PC. Be sure to tighten the
screw locks to ensure a good
permanent connection.
Pin 13 Data bit 4
Pin 14 Data bit 5
Pin 15 Data bit 6
Pin 16 Data bit 7
Pin 17 REN
Pin 18 Ground
Pin 19 Ground
Pin 20 Ground
Pin 21 Ground
Pin 22 Ground
Pin 23 Ground
Pin 24 Ground
PC Elite Reference
2-21