Table of Contents
Advertisement
8.11. Disassembly
Assembly
• Refer to "Disassembly of Net Frame Assembly"
• Refer to "Disassembly of Base Stand Assembly"
• Refer to "Disassembly of Docking Lid"
• Refer to "Disassembly of Front Cabinet Assembly"
Step 1 : Remove 3 screws.
Step 2 : Lift up Gear Box Assembly as shown.
Caution: During assembling of Gear Box Assembly, ensure
that the Gear Box Assembly is properly seated on the loca-
tors.
Step 3 : Detach 2P wire at the connector on Motor P.C.B..
Step 4 : Remove Gear Box Assembly.
of
Gear
Box
8.11.1. Disassembly of Motor P.C.B.
• Refer to "Disassembly of Gear Box Assembly"
Step 1 : Release 2P wire from slot.
Caution : During assembling, ensure the 2P wire is dress
into the slot.
Step 2 : Release 2 catches as show.
Step 3 : Remove Motor P.C.B..
Caution: During assembling, ensure the Motor P.C.B. is
seated properly by the 2 catches.
41
Advertisement
Table of Contents
