Table of Contents
Advertisement
8 Disassembly and Assembly Instructions
• Illustration is based on SA-AKX38PH-K.
• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of "Main components and P.C.B Locations" as described in this service
manual)
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
• Avoid touching heatsinks due to its high temperature after prolong use.
• Be sure to use proper service tools, equipments or jigs during repair.
• Select items from the following indexes when disassembly or replacement are required.
• Disassembly of Top Cabinet
• Disassembly of Front Panel Unit
• Disassembly of Panel P.C.B. and Music Port P.C.B.
• Disassembly of USB P.C.B.
• Disassembly of Rear Panel
• Disassembly of Main P.C.B.
• Disassembly of SMPS Module and Voltage Selector P.C.B. (PH)
• Disassembly of CD Mechanism Unit
• Disassembly of CD Interface P.C.B.
8.1.
Type of Screws
8.2.
Disassembly Flow Chart
8.5. Front Panel Unit
8.6. Panel P.C.B. and
8.7. USB P.C.B.
8.11. CD Mechanism
8.12. CD Interface
Music Port P.C.B.
Unit
P.C.B.
8.4. Top Cabinet
21
8.8. Rear Panel
8.9. Main P.C.B.
8.10. SMPS Module
and Voltage
Selector P.C.B.
(For PH only)
Advertisement
Table of Contents
