8.19. Disassembly
P.C.B.
• Refer to "Disassembly of CD Mechanism"
Step 1 : Release both catches and push down the fixed pin as
arrow shown.
Step 2 : Lift up the Mecha Chassis to remove Traverse Deck.
of
CD
Servo
Step 3 : Remove 3 screws.
Step 4 : Desolder pins on the solder side of CD Servo P.C.B..
Step 5 : Flip over the CD Servo P.C.B..
Step 6 : Detach 24P FFC at the connector (CN7001) from the
CD Servo P.C.B..
55