Table of Contents
Advertisement
Installation
Location
Location
Plan location of transceiver and microphone
bracket before starting the installation.
Select a location that is convenient for operation,
yet does not interfere with the driver or passenger.
The transceiver is usually mounted to the
underside of the dash with the microphone
bracket beside it.
Mounting and
Mounting and Connection
Connection
Hold the radio with the mounting bracket
1
in the exact desired location. If there is no
Note
interference, remove the bracket and use it
as a template to mark the location for the
The transceiver is held in the
mounting screws.
universal mounting bracket
by two thumbscrews which
allow for adjustment at a
convenient angle.
The bracket includes two
self-tapping screws and star
washers. The mounting
must be mechanically strong,
conveniently located.
Drill the holes and secure the bracket.
2
2
AW-1210041-1B_29NWLTD_CLASSIC_MANL REV_022021.indd 2-3
AW-1210041-1B_29NWLTD_CLASSIC_MANL REV_022021.indd 2-3
ANT
Connect the antenna cable plug to the
3
receptacle marked "ANT" on the back
of the unit.
Installation
PA.SP. EXT.SP.
+
–
POWER
continued
3
2/24/21 2:57 PM
2/24/21 2:57 PM
Advertisement
Table of Contents
