Remote Services; Connect; Disconnect - Brainboxes BL-500 Software Manual

range, or has been set to an undiscoverable state.
Security Mode: This specifies the security level used to connect to
the remote device
Remember Me: An option to remember the device next time the
application is opened.

4.4. Remote Services

This section attempts to describe generically, but by example, how to connect to all supported services
and the behaviour the user would expect to see when connecting to these services. For specific
information regarding the behaviour of your specific device, please comsult it's interoperability document
(if it exists)

4.4.1. Connect

Connecting to remote services, once found is fairly straight forward. With the exception of the OBEX
services (see Object ), the connection is made by just double clicking the required service. Alternatively,
the user can right click the service and click connect, or select the service and click the connect button on
the toolbar (as highlighted).

4.4.2. Disconnect

Disconnecting is again a straightforward operation. In many instances disconnecting the Bluetooth service
will also result in the automatic disconnection of any applications which use this service, although this
does depend on the capabilities of the specific application in question. To perform a disconnect, right click
on the currently connected service and select Disconnect from the menu.
My Bluetooth Devices .doc © Copyright Brain Boxes Li mited 2002 Page 21 of 36