Remote Devices; Get Remote Name - Brainboxes BL-500 Software Manual

clicking the Connect icon will create a connection. You may need a
pin number depending on the device that you are attempting to
connect to.
While connected the disconnect icon will becom active and clicking
on this will break the connection.
My Properties: Clicking this icon will open the Local Device
Properties dialog. This is detailed on Page 16.

4.3. Remote Devices

Right Clicking on any remote device listed in the User Interface brings up an additional context menu
offering further functionality as described below.

4.3.1. Get Remote Name

In some instances remote devices may only be listed by giving it's Bluetooth address. In others, a remote
devices name may change and the user may wish to update the User Interface to reflect this new name.
Bringing up the context menu by right clicking the particular remote device you are interested in and
clicking the "Get Remote Name" option will retrieve the remote devices name as you can see
demosntrated below. If this fails to retrieve the name, try increasing the Remote Name Timeout as shown
in My Bluetooth Dev ices – Options – General.
My Bluetooth Devices .doc © Copyright Brain Boxes Li mited 2002 Page 15 of 36