Bond - Brainboxes BL-500 Software Manual

4.3.4. Bond

Some devices need to perform a procedure called Bonding, or Pairing before they will allow the user to
connect to their services (some won't even let you browse their services without bonding!). Of these
devices which need to Bond, some require manual bonding (as with the phone example below), whereas
others will automatically initiate the bonding process as soon as you try to access them.
To manually initiate a Bond to a remote device, ensure the remote device is configured to accept bonding,
then right click on the device in the User Interface and select Bond.
My Bluetooth Devices .doc © Copyright Brain Boxes Li mited 2002 Page 18 of 36