Starkey Z Series Quick Tips

QuickTIPS

SURFLINK REMOTE CONTROL: SETUP

PRODUCT AVAILABILITY:

ENABLING SURFLINK REMOTE CONTROL IN INSPIRE

1. Launch
Inspire 2014.3
2. Connect and detect hearing aids to the fitting computer via the
appropriate programming accessories. Refer to the Boots and
Cables Programming Guide available via Inspire Online for additional
information regarding connecting the hearing aids.
3. Select New Session
4. Select
Accessories
5. Select
Remote Control
6. Select the appropriate faceplate: Advanced, Intermediate, or Basic.
NOTE: Default is Advanced.
7. Enter the
SurfLink Remote Address
SurfLink Remote) under
8. Select Sync.
NOTE: The hearing aids and SurfLink Remote are now synced.
9. For Advanced Remote Control, select a
from the drop down menu. Options include:
» None
» Stop/Start Audio Stream (default)
» iQ Boost
» Jump to memory 4
» MultiFlex Tinnitus On/Off (only available for the Z Series microRIC
312)
10. If also using a
SurfLink Media
QuickTIP available via Inspire online for additional information.
Z Series, 3 Series wireless, Xino wireless, Wi Series
or higher.
on the Get Started Screen and select Start.
on the left navigation bar.
under SurfLink Accessories.
(located on the back of the
Remote Control Syncing.
Favorite Button Configuration
Device, refer to the SurfLink Media Setup
®
Enable SurfLink Remote Control
SurfLink Accessory Sync Code
Favorite Button