Philips EasyKey 7000 Series User Manual page 7

Pre-setup instructions
Step 1 | Determine door swing direction
This product allows you to have your door installed to go in four directions:
left outward, right outward, left inward and right inward.
Left-handed door
Attention
1. Please choose the proper installation kit to suit your door thickness.
2. The default installation kit is applicable for a door thickness of 60-90mm. If your
door thickness does not within this range, please feel free to contact us.
Step 2 | Change the orientation of the latch bolt
Loosen the screws by turning them
1
counterclockwise with an Allen
wrench and remove the mortise
plate.
Mount the mortise plate and
3
fasten it with screws.
Left inward
Left outward
Mortise plate
Allen wrench
Mortise plate
Allen wrench
Right-handed door
Take out the latch bolt and rotate
2
it to 180°, then put it back.
Latch
bolt
Right inward
Right outward
5