Philips EasyKey 7000 Series User Manual page 17

④ Enter [#] on the smart door lock
keypad and enter the master PIN code,
then enter [#] again to go to master
mode. Enter [5] and then enter [1] to
join a network. After that, you will hear
a voice prompt of "network connecting,
please wait" .
⑤ Once you enter the pairing screen,
follow the hints on the app screen to
enter a Wi-Fi password and a QR code
will be generated. Then align it with the
smart lock's camera. After scanning,
please complete the pairing set up in
the app.
Attention
The smart lock is only compatible
with a router with dedicated 2.4 Hz
(5G Hz Wi-Fi is not supported). Please
make sure that the distance between
the smart lock and the router is
less than 10 meters, otherwise the
connectivity of the router will be
affected.
15