Replacing Damaged Rotor Blades; Camera Operation; A) Switch On/Off - Reely X-140 RTF Operating Instructions Manual

• To select it press the speed switch 3 times from the original configuration, the quadrocopter will sound a beep
indicating that it is in the fast/acrobatic mode.
• Once selected you only need to quickly shift the right control stick to any direction to perform a Flip & Roll.
It is not recommended to perform Flip & Roll close to objects or persons.

11. Replacing damaged rotor blades

To replace rotor blades on your quadrocopter please follow the
following instructions:
• Your quadrocopter has 4 rotors, 2 of which turn clockwise (A) and
the other two anti-clockwise (B). See illustration Fig. 8.
• These two types of rotors use blades of opposite types since each
of the two pairs of blades is designed to work in a different direction
of turn.
• The kit provided in its original packaging contains 4 replacement
blades, two type (A) and two type (B).
• If one of the blades is damaged following an impact, you must
replace it by removing the damaged blade and replacing it with a
new blade of the same type, otherwise your quadrocopter will not
be able to fly properly.

12. Camera operation

a) Switch ON/OFF

• The quadrocopter has a specific switch to turn on and off the
camera. The illustration shows the position of the switch.
• With this function you can disable the camera when you don't
want to take pictures or record videos in order to increase the
flight time of your quadrocopter.
• By moving the switch forward you will cut the power of the
camera. To switch the camera on you must move it back.
• If the LED at the camera is blinking the camera is on.
B
A
Camera ON/OFF switch
Fig. 9
A
B
Fig. 8
37