C) Download The App - Reely X-140 RTF Operating Instructions Manual

c) Download the APP

Download the App from Google Play or Apple App Store.
In order to activate the control App mode, you must follow the following steps:
• Make sure that the transmitter is switched off before you start the connection with the App. Connect your flight
battery and place the quadrocopter on a horizontal surface.
• Set the camera ON/OFF switch to position ON (see Chapter 12. Camera operation, illustration fig. 9).
• Access the menu of your Smartphone Wifi network.
• Select the Wifi network that generated your quadrocopter and make sure it is connected properly.
• Once the connection has been made, access your REELY FPV App.
• If the connection is made successfully, once you press the PLAY button of the App, you should receive the live
image from the camera of the quadrocopter.
• If you control the quadrocopter with your smart device / smartphone the transmitter controls are disabled. If
you wish to use your transmitter again, you need to deactivate the App first and then bind the transmitter with
the quadrocopter. The flight controls only work on either smart device or transmitter depending on which one is
connected through "Binding" with the Quadrocopter.
• You can attach your smartphone to the holder (3) of the transmitter and view the live image from the camera while
you use the controls of the transmitter.
• In case of not receiving the signal, disconnect your quadrocopter, restart your Wifi connection and repeat the
process again.
• Follow the App menu for further information and help.
32